Hi all! I'm back again to highlight one of the features I think is really cool that Ive seen on the Z60 ultra complete and no other robot. Just for the record, I did receive the unit as part of Mova's Get and Create Program. The Z60 has a cool feature called "Water Stain Cleaning". You can find it by selecting either a room or zone clean and it appears on the left, under the cycles icon. What it does is wash the mop roller to make sure it's clean and heads up for a mop only run. Then when it gets to the location of the wet mess it will mop without adding any water to the roller. This allows the roller to just absorb the excess liquid and dump it into the onboard dirty water tank. I personally think it did a really good job absorbing the water, but one thing to keep in mind is that the onboard dirty water tank is somewhat small so if there is a lot of liquid it may take multiple trips back to the base station to dump it. I can see this be VERY useful if you have kids or animals as after a bath it can come it and absorb the excess liquid that was spilled.
One thing that really stood out to me besides its ability to absorb the liquid was it's ability to not spill the liquid when returning to the base station even when it went over a transition. A lot of roller mops have had issues with leaky onboard dirty water tanks when going over thresholds so I was really happy to see that the Z60 has no problem at all!
If you have any questions feel free to ask below and I'll do my best to answer them. I hope you all have a wonderful day!
US
104
