A Clean Filter Makes the Dirt Go Out!

The Mova V50 Ultra Complete uses a HEPA filter to ensure the vacuum components have clean, dust-free air. However, this filter sometimes needs to be changed out after doing such a great job; it deserves rest! To install the replacement air intake filter, perform these steps:

1) Run an Auto-Empty to ensure the dust bin is empty. This prevents any leftover dirt from spilling out of the bin while changing the filter.
2) Remove the magnetic top cover. This was done during the first-time setup when scanning the QR code to connect the vacuum to Wi-Fi.
3) While holding the rear of the bin, pinch the tab on the LIDAR side of the container and pull the bin out.
4) Remove the filter by unlatching the lock that's on the opposite side from the dust intake.
5) Perform the previous steps in reverse.

TranslateView Original Text