New passage after moving station

I mapped my yard and set up a passage to both zones no problem at all, everything was great.  I’ve since moved my station about 8 feet away to be under cover.  The mower won’t find the station on its own so I’ve tried to edit the maps and set a new passage.  I start in the station and it backs up, ultimately goes into location mode where it spins around and then fails.  Tells me to move mower into a flat spot within the map.  That doesn’t work because I have to set up the passage starting from the station.  How can I fix this without remapping my whole yard?

Did you try moving both the station and the mower and starting a new mowing routine? The mower has to position itself after leaving the station and if it has positioned itself previously, it may not easily find the station!

Hi,there. We understand your situation. The robot only supports relocating the charging station a short distance within the existing map. When you move the docking station significantly farther away, the robot cannot update its positioning data properly. In this case, you will need to delete your current map and remap the whole yard.

Thanks

Good morning, we are truly sorry and we understand your concern. However, two separate maps cannot be merged into one. You can add the missing areas to a single map and then delete the second map. Besides, you may also create two identical maps if you wish to adjust certain positions.